SAN-AIR Surface Mould Remover 500ml

SAN-AIRtm Surface Mould Remover thoroughly cleans any surface of mould without any toxic chemicals.  Simply spray onto any surface leave 15 minutes then wipe away.

Instructions

1. SET UP
   • Adjust the nozzle to a fine spray, test the surface you want to clean by spraying a small area first.
     (Note it is normal to see the surface lighter in colour while wet).
2. CLEAN
   • Spray to coat mould evenly, wait 15 minutes and wipe the mould off with a clean dry cloth.
   • Ensure that dirty clothes are not reused as you will spread the mould. Instead, for each wipe, use a clean area of the cloth until the cloth is used up, then continue cleaning with a new clean cloth.
   • Repeat step 2 until all mould has been removed.
3. FINISH
   • Use a final spray with a fine mist and allow to air dry, leaving a fine mould prevention coating.

Follow the instruction on the label to get maximum results.

Don’t risk damaging you or your property with chemical mould removers.

Life-Span: 2 years shelf life