eXperts in home ventilation, sub floor damp, mould, condensation control + split & ducted air conditioning
Book a FREE Home Assessment
This system is designed to exhaust damp trapped air from the sub floor and introduce fresh air in through existing or new passive vents. This cuts off the source of the moisture from being evaporated through timber floors into the property which helps with mould and mildew issues and protects your timber floors. Xchange air also have second solution (see below) which can be used in conjunction with, or alternatively to, subfloor ventilation fans.
Essentially the concept of our whole home ventilation systems (PIV) is the introduce fresh, filtered air into the dwelling at a continuous rate, encouraging movement of air from inside to outside.
To achieve this, the unit is mounted in the roof space, drawing air through the filters and inputting it, at ceiling level, into the property. The units are fitted with an internal temperature sensor. This sensor continuously monitors the temperature in the roof, boosting the air volume when the roof temperature is above a set level (heat recovery mode). It also has a small heater to temper the incoming air so the fan can run overnight.
If the roof temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed the airflow can be set to suit the house size and if required the way it responses to the temperature changes within.
We also have another exciting PIV product that in the same way as above it is designed to take fresh air from outside clean the air, warm it (if fitted with heater) and discharge it into the central hallway. The advantage of this system and the way it can be installed is that it’s perfect for Units, Apartments and houses with no roof space.
This system is designed to introduce clean, dry, healthy air into our homes. This is the only system on the Australian market that will even heat the incoming air if the temperature drops too much, thus leading to a much more consistent environment. This introduced filtered and dried air will fight mould and mildew problems in the home, leaving a clean and healthy environment for the entire family.
Airflow is created in the house subfloor by a powerful, whisper quiet, inline fan that creates a low pressure system under the floor which draws in drier external air through passive vents and exhausts out the damp trapped air outside the house.
Dry, healthy air is introduced to each area of the house by pulling air through a filter, fan heater (if required) and a pure air module then diffusing it into the home. This creates a consistent positive air pressure environment inside the home that is controlled by an electronic control panel.
Controls condensation, eliminates mould, mildew and odours
Enjoy a fresher, drier, healthier home - Breathe easy with fresh filtered air
Relieves allergies and asthma
Reduces air conditioning reliance and cost
Heated systems - why introduce freezing air during winter
A system to suit almost every home - even those with no roof cavity
Better security - you can now keep your doors and windows locked
Sub floor ventilation reduces dampness under the floor and internal rooms
Protects against Termites
